18th Edition Wiring Regulations
BEAMA HAS PRODUCED TECHNICAL PRODUCT GUIDES & BULLETINS TO COINCIDE WITH THE PUBLICATION OF THE 18TH EDITION OF THE WIRING REGULATIONS
To coincide with the publication of the 18th Edition of the Wiring Regulations on the 2ndJuly 2018 BEAMA published a series of Guides and Bulletins. An explanation for each guide / bulletin is detailed below.
BS 7671: 2018 IET Wiring Regulations 18th Edition specifies requirements for overload protection of an RCCB or switch in an LV assembly, Regulations 5126.96.36.199, 536.4.5 and 536.4.202 refer. This bulletin provides guidance for RCCB and switch overload protection.
This bulletin provides guidance on Regulation 512.1.5 of BS 7671: 2018 IET Wiring Regulations 18th Edition.
Arc Fault Detection Devices represents a new category of additional protection against fire caused by arc faults in AC final circuits. BS 7671: 2018 IET Wiring Regulations 18th Edition recommends the use of AFDDs for certain applications. This BEAMA guide provides detailed technical information and application guidance for AFDDs in electrical installations.
This Guide provides specifiers, installers and end users, clear guidance on the selection and application of the wide range of RCDs now available. It details the specific applications of Types AC, A, F and B RCDs which are now recognised in BS 7671: 2018 IET Wiring Regulations 18th Edition. Guidance is also given on the installation and maintenance of RCDs, including many of the installation conditions that cause ‘unwanted tripping’.
This Guide is intended as a practical guide for designers, specifiers and installers to enable them to comply with surge protection requirements in BS 7671: 2018 IET Wiring Regulations 18th Edition.
For further information contact Chris Pack, Portfolio Manager - Building Electrical Systems
Email [email protected]
Mobile 07833 473 680